News

Ground Resistance or Impedance? The goal of any grounding system is to provide a low impedance path for fault or transient currents to the earth. “Grounding” may be described as the process of m...

Remote Monitoring of Smart SPDs SPDs can be installed in electrical rooms and distant locations where there is not necessarily maintenance staff. This creates a need for monitoring from...

Differences in Surge Protective Device Classification, Parameters and Test Methods UL 1449 5th Edition vs. IEC 61643 Key Parameters of SPDs 1. Impulse Current (Iimp) • Defi...

Integration of Lightning Protection Systems with Building Management Systems The integration of Lightning Protection Systems (LPS) with Building Management Systems (BMS) represents a sig...

Testingof Grounding Systems: The Revision of the IEEE Std81 Over the Years Grounding Design Procedures Have Been Developed as Well as Appropriate Standards, Most Notable: •ANSI/IEEE Std ...

Supply System Configuration of American Grid Systems 1.Split Phase 2.Single Phase 3. 3-Phase WYE "Y" 4. 3-Phase Delta "D" 5. High-leg...

 The Basic Differences Between UL 96A, NFPA 780 and LPI 175 For electrical engineers, contractors, installers, designers and other individuals whose jobs involve lightning protection system...

Understanding Lightning Protection Systems Scientific advances improve lightning protection for mission critical facilities Benjamin Franklin demonstrated that an electrically conductive path ...

Difference between Conventional and ESE Air Terminals Lightning, a natural phenomenon with immense power, can wreak havoc on structures and electrical systems. To mitigate the potential da...