REP-MS25T1+T2-1300-5S

Product Details
Features
Combination T1+T2 SPD, enabling zero-clearance installation with downstream Type 2 SPD
Specifically designed for higher voltage systems to prevent hazards caused by  direct or indirect lightning current impacts, providing effective protection for numerous industrial applications;
For power equipment in wind turbine / photovoltaic (PV) systems, our SPD fully meets market demands
It is recommended to equip a 200A fuse or backup protector, with its voltage matched to the transformer box voltage.

Datasheet

Model	REP-MS25T1+T2-1300-5S
The SPD according to IEC/EN 61643-11	I+II/T1+T2
Nominal AC voltage(Un)	800Vac
Maximum continuous voltage(Uc)	1200Vac
Lightning impulse current(10/350μs) Iimp	12.5kA
Nominal discharge current(8/20μs) In	12.5kA
Voltage protection level Up	4.5kV
Response time tA	≤100ns
Transient overvoltage test voltage (TOV)	≥1730VAC
Varistor voltage (1mA)	1620V
Backup fuse	200AgL/gG
Remote alarm signal	NC contact (Optional) Yes☑ No☐
Operating temperature range	-40℃...+80 ℃
Altitude	≤2000m
Pollution Degree	Class D
Work/Fault indicator	Green: Normal ; Red: Failure
Cross-sectional area (min.)	6mm²flexible
Cross-sectional area (max.)	35mm²flexible
For mounting on	35mm DIN rail
Enclosure material	Red thermoplastic,UL94 V-0
Degree of protection	IP20
Module width	144mm
Dimensions(mm)	Diagram
Side                                   Front	Diagram

SEND INQUIRY