（SPD for Outdoor Transformer）REP-MP40/2P Series

PRODUCT DETAILS

Features

• REP-MP40/2P adopts ULcertified MOV as the key component.
• Max discharge current Imax(8/20μs) 40kAat each path(L-PE;N-PE).
• Easy installation, with 60cm connection wire, connect directly to the phase and neutral (or ground) on the LV side of the transformer,and the arrester has a voltage range of 240V to 480V(MCOV of 240Vrms and 480Vrms).
• Sealed well for water-proof and inflaming retarding, suitable for harsh outdoor environment

Datasheet

Type	REP-MP40-240-2P-3	REP-MP40-480-2P-3
Standard	UL1449 4th;IEC61643 - 11:2011	UL1449 4th;IEC61643 - 11:2011
Frequency	50/60Hz	50/60Hz
Power system(Un)	120/240Vac	240/480Vac
MCOV	240Vrms	480Vrms
Maximum continuous operating voltage(Uc)	240Vac	480Vac
Nominal discharge current(8/20μs)(In)	5kA	5kA
Maximum discharge current(8/20μs)(Imax)	40kA	40kA
Impulse voltage(1.2/50μs)(Uoc)	10kV	10kV
Voltage protection level(Up) @5kA	<1.2kV	<1.6kV
Voltage protection level(Up) @20kA	<1.8kV	<2.2kV
Leakage current(IL)	<0.1mA	<0.1mA
Response time	≤25ns	≤25ns
Isolation voltage	6kV rms	6kV rms
Temporary over voltage(TOV)	335Vac,5s	670Vac,5s
Operating temperature range	-40°C~+85°C
Work status	Failure indication; Remote alarm contact optional
Installation wire	Black(L/N):2 wires; White(PE):1 wire
Wire specification	UL1015 Certified, 10AWG,60cm
For mounting on	Bolt fixing
Enclosure material	304 Stainless steel
Degree of protection	IP68
Seal material	Epoxy resin